News
HUMI BLOCK - WATERPROOF TREATMENT FILLER FOR DAMP MASONRY
Innovation 2011
HUMI BLOCK: The ideal waterproof treatment filler for damp masonry
TOUPRET introduces Humi-block, the newly developed filler in powder that stops dampness and prevents humidity, either permanent or occasional, visible on raw masonry substrates.
HUMI-BLOCK levels uneven surfaces and can be used occasionally for filling up (up to 1 cm per coat).
Meant for interior or exterior application, Humi-block adheres exceptionally on either dry, damp or wet substrates, but not dripping nor running. After completely drying, overcoats with any type of water borne coating or preparatory fillers.
AIRSPRAY FINISH – READY TO USE SELF-SMOOTHING SKIMCOAT FOR AIRLESS APPLICATION
Innovation 2010
AIRSPRAY FINISH is a ready to use skimcoat filler.
AIRSPRAY FINISH ready to use self smoothing skimcoat that can be sprayed by airless spray machine on a flow of 2.6l/min. or traditionally blade appled.
With up to 1.5 mm per coat the product achieves a great smooth finish without manual levelling.
AIRSPRAY FINISH can be manually troweled and a perfect finish can be achieved by trowling after spraying.
AIRSPRAY FINISH can be used on any absorbent substrates,either painted or unpainted, new or renovated.
AIRSPRAY FINISH : a second coat if required can be applied after 24 hours.
AIRSPRAY FINISH can be painted when fully dry in normal temperature conditions in 24 hours.
AIRSPRAY FINISH can be coated over by any conventional paint or wall covering
AIRSPRAY FINISH is a ready to use skimcoat filler.
AIRSPRAY FINISH ready to use self smoothing skimcoat that can be sprayed by airless spray machine on a flow of 2.6l/min. or traditionally blade appled.
With up to 1.5 mm per coat the product achieves a great smooth finish without manual levelling.
AIRSPRAY FINISH can be manually troweled and a perfect finish can be achieved by trowling after spraying.
AIRSPRAY FINISH can be used on any absorbent substrates,either painted or unpainted, new or renovated.
AIRSPRAY FINISH : a second coat if required can be applied after 24 hours.
AIRSPRAY FINISH can be painted when fully dry in normal temperature conditions in 24 hours.
AIRSPRAY FINISH can be coated over by any conventional paint or wall covering
TX PULSAR – READY TO USE SKIMCOAT FOR AIRLESS APPLICATION
Innovation 2010
The First airless levelling skim coat that’s been engineered to be sprayed via small airless machines (1.25 l/min) without manually smoothing with a blade !
TOUPRET offer TX PULSAR, a ready to use, self smoothing filler in paste form to be sprayed……. like the other products in the Expert range, it will enable you save time on site.
The excellent fluidity of this paste filler enables its spraying via small airless machines (1.25 l/mn) and provides a smooth finish which is ready to paint or cover when dry with no further effort.
An interior skimcoat which can be applied on any absorbent, unpainted or painted substrates, either new or renovated.
If necessary TX PULSAR can be painted or overcoated between 12 and 24 hours.
TX PULSAR can be left as a finish in its own right or be over coated by any conventional paint or wall covering.
The First airless levelling skim coat that’s been engineered to be sprayed via small airless machines (1.25 l/min) without manually smoothing with a blade !
TOUPRET offer TX PULSAR, a ready to use, self smoothing filler in paste form to be sprayed……. like the other products in the Expert range, it will enable you save time on site.
The excellent fluidity of this paste filler enables its spraying via small airless machines (1.25 l/mn) and provides a smooth finish which is ready to paint or cover when dry with no further effort.
An interior skimcoat which can be applied on any absorbent, unpainted or painted substrates, either new or renovated.
If necessary TX PULSAR can be painted or overcoated between 12 and 24 hours.
TX PULSAR can be left as a finish in its own right or be over coated by any conventional paint or wall covering.
